80T500x500 semi-automatic vulcanizing machine
It is suitable for pressing various molded products, such as pressed rubber and thermosetting plastics, and is also suitable for sheet products. The flat vulcanizing machine has a four-column overall structure and the pressing type is downward (downward) pressing. It is divided into main engine, fuel tank and electric control box. Three parts. The main machine is equipped with plunger, oil cylinder, fixed plate, movable plate and other components. The oil tank has oil pumps, pipes, valves and other components. The oil pump is driven by an electric motor. The electric control box is equipped with a button switch, a magnetic starter, a timing alarm, an automatic temperature controller, an overload protector, etc. When the motor is overloaded, the power supply can be automatically cut off. The electric heating is controlled by an automatic temperature controller in three ways. The temperature can be adjusted arbitrarily within the range of 20-200℃. When the temperature is reached, the circuit can automatically maintain a constant temperature. When the set vulcanization time is reached, it can automatically alarm. The three hot plates of the flat plate vulcanizing machine are accurately installed in the middle of the frame. The middle hot plate is equipped with a guide sleeve for positioning, making the up and down strokes safe and reliable.
